Andrew James AJ000058 Induction Hob - Manual (Page 6)

6
induction hob.

Press the On/Standby key once, the LED display will show “L” and the power
indicator light will flash. The cooking function is now ready to be selected.
(Note: if no operation is selected for 30 seconds after pressing the On/
Standby key, the indicator light will automatically turn off).

Press the function key once, the pre-set power stage “5” is selected and the
device will begin to heat.

You can change the power setting with the arrow keys at any time from the
power range of 1-10.

Press the function key a second time to select the temperature setting. The
pre-set temperature “120˚C” will automatically be selected.

The temperature setting can be then changed from a range of 60-240˚C by
using the arrow keys.

The induction hob can be changed from the power level setting mode to the
temperature setting mode at any time during the operation by pressing the
function key and selecting the desired function. The value last set in the
respective operating mode will be stored upon switch over.

Press the function key a third time and the time function will be selected.

The display will show the number “0”. The arrow keys can then be used to
select the desired time in 5 minute intervals (up to a max of 180 minutes)
.

The display will then count down the duration in minutes. Please note that
the time, power level and temperature setting can all be changed
individually during the cooking process.

Once the cooking or warming process is complete, disconnect the mains plug
from the power outlet.

Do not place any empty cookware on the ceramic plate. Heating an empty
pot or pan will activate the overheating protection and the device will turn
off.

Do not operate the device if it is damaged in anyway or does not function
properly.