Andrew James AJ000040 Teppanyaki Electric Table Grill - Manual (Page 14)

14
Electrical information
Please note:
It is extremely important that the wires or cores in the flex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:

The Live (Brown) wire connects
to the right- most live (L)
terminal nearest to the fuse.

The Neutral (Blue) wire connects
to the left-most neutral (N)
terminal.

The Earth (Green and Yellow)
wire connects to the central, top
most earthed (E) terminal.
Warning:
If the appliance is double insulated
indicated by the double insulated symbol: It should not have an earth wire or
earth connection.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same identical rating as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualified electrician.
Please note after replacing the fuse, ensure that the cover is correctly fitted back
onto the plug. Never attempt to run the appliance if the plug does not have a cover.
If a moulded plug is fitted and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent it from engaging into a
socket.