Cla-Val X60M - Manual

Orifice Plate Flange Assembly
CM15-BA3-3
(3-Way Valve)
CM15-BA3-3
(3-Way Valve)
HSD
(Heat
Sensing
Device)
81M
Check Valve
81M
Check Valve
PRP Valve
(Pneumatic
Release Pilot)
CSCV
Check
Valve
100M-1KR
(Remote Control Valve)
100PM-4B
(Magazine Sprinkling Valve)
X60M
Orifice
Flange
Assembly
(Hydraulically Actuated
Check Valve)
81M
Check Valve
81M
Check Valve
X60M
Orifice
Flange
Assembly
81M
Check Valve
81PM-1
Firemain To Magazine
FH Alarm
Closed Loop Piping Closed Loop Piping
Open Loop Piping Open Loop Piping
Typical Application
• Precise System Pressure Control
• Visual Indication of System Status
• Sea Water Resistant Materials
• Ensures Proper System Operation
The Cla-Val Model X60M Orifice Plate Flange Assembly is
designed for use in the Hydraulic Activation portion of a
shipboard Dry Type Magazine Sprinkler System. The Orifice
Plate is machined from Monel and has a 1/8th inch flat plate
with a single 0.098” hole. The Orifice Plate is held in the
piping with included flange assembly. An indicating tab
extends from the assembly to show the presence of the plate
and the orifice size. Two X60M Assemblies are used in typical
Dry Type Magazine Sprinkler System. One is in the Open-
valve activation loop and the other is in the Closed-valve
activation loop. Water flow through the X60M to atmosphere
will visually indicate either fully charged pressure state or
automatically relieving any excess pressure build-up in valve
activation loop.
Dry Type Magazine Sprinkler System
with X60M Orifice Plate Flange
Assembly
CLA-VAL
© Copyright Cla-Val 2005 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • Website cla-val.com
E-X60M
X60M
MODEL