Power switch, Fp flash button – Canon 220 EX User Manual

Page 9

Advertising
background image

Before
You
Start

9

Power Switch

PILOT

E-TTL

H

Set the power switch as follows:

: To turn off the power.

: To turn on the power. If the Speedlite

220EX is left unused for about 90 sec., it
turns off automatically to save battery
power. To turn on the Speedlite 220EX
again, press the shutter button or press the
test firing button.

PILOT

E-TTL

H

Press the FP flash button to set to high-speed
sync which enables the Speedlite 220EX to syn-
chronize with all shutter speeds. The FP flash indi-
cator will light.
To cancel FP flash, press the FP flash button
again.

• When the Speedlite 220EX is used with Type A cameras

and the FP flash button is set to high-speed sync, using a
shutter speed faster than the camera maximum sync
speed sets the high-speed sync mode. Likewise, using a
shutter speed equal to or slower than the camera maxi-
mum sync speed sets to the normal sync mode.

• When the Speedlite 220EX is used with Type B cameras,

the normal sync mode is set regardless of the FP flash
button setting.

FP Flash Button

220EX(E) 15-10-2002 07:11 Pagina 9

Advertising