Alpha Technologies Continuity: 1000_2000_3000 - Manual (Page 22)

0170009-J0 Rev B 20
4.4 REPO Switch
The UPS is equipped with a remote emergency power off (REPO) switch. The user must supply a means
of interfacing with the REPO circuit so that the UPS input feeder breaker can be switched off to interrupt
all sources of power to the UPS and connected equipment. This requirement complies with national and
local wiring codes and regulations.
1 = REPO+
2 = Ground
Short Pin 1 and Pin 2 to enable the REPO function
1 2