Anest Iwata LPH101-LVP User Manual

Lph-101-lvp, Instruction manual, Important specifications

Advertising
background image

- 1 -

■Important specifications

Max. Pressure

0.68MPa / 6.8 b a r / 98 PSI

Noise level

75 d B (A)

Spray condition

Recommended

Measuring point

1m backwards from gun , 1.6

m height


HVLP Compliant Spray Gun

LOW VOLUME LOW PRESSURE






Be sure to observe warnings and cautions in this instruction manual.

If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.

Be sure to observe following

marked items which are especially important.

Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property
damage.

Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum

necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as

your own company regulations.



■Main specifications










※1. Atomizing air pressure means air pressure at gun inlet when trigger is pulled and air flows.












This Anest-iwata spray gun kit complies to ATEX

regulations 94/9/EC,

Protection level

Ⅱ 2 G X,Suitable for use in Zones 1 and 2.

X marking

Any static electricity discharge from the spray gun

is to be diverted to the grounded the conductive

air hose as stipulated

.

LPH-101-LVP

INSTRUCTION MANUAL

This manual contains IMPORTANT WARNINGS

and INSTRUCTIONS.

Equipment in this manual is exclusively for painting purposes.

Do not use for other purposes.

The operator shall be fully conversant with the requirements stated in this

instruction manual including important warnings, cautions and operation and

correct handling.

Read and understand the instruction manual, before use and retain for

reference.

Max. Temperature

Atmosphere

5℃~40℃

Air・Fluid

5℃~43℃

Recommended condition

Model

Type of

feed

Nozzle

orifice

Air cap

※1 Atomizing

air pressure

MPa (bar /PSI)

Air pressure

inside air cap

MPa (bar/PSI)

Fluid output

Set

Mark

φ mm (in)

ml/min

Air

consumption

l/min (cfm)

Pattern

Width

Mm (in)

Air & fluid

Connection

Mass

g (lbs)

LPH-101 -082LVP

0.8(0.031)

100

230 (9.1)

Air

LV6

0.18

(1.8 /25)

0.05

(0.5 /7.1)

280 (9.9)

Pressure

250(9.8)

1.0(0.039)

150

LPH-101-102LVP

G1/4

(NPS 1/4)

Fluid

G3/8

NPS

3/8

295

(0.65)

Advertising