Anest Iwata LPH400-LVX User Manual

Lph-400-lvb/-lvc/-lvx, Hvlp compliant spray gun, Main specifications

Advertising
background image

- 1 -


HVLP Compliant Spray gun

Low Volume Low Pressure





Be sure to observe warnings and cautions in this instruction manual.

If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.

Be sure to observe following marked items which are especially important.

Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property

damage.

Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum

necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as

your own company regulations.




■Main specifications

Recommended condition

Model

Type of

feed

Nozzle

orifice

φ mm (in)

Air cap

set

Mark

※1 Atomizing

air pressure

MPa (bar /PSI)

Air pressure

inside air cap

MPa (bar /PSI)

Fluid output

ml/min

Air

consumption

l/min (cfm)

Pattern width

mm (in)

Air & fluid

connection

Mass

g (lbs)

LPH-400-124LVC 1.2

(0.047)

90

260

(10.2)

LPH-400-134LVC 1.3

(0.051)

110

280

(11.0)

LPH-400-144LVC 1.4

(0.055)

130

290

(11.4)

LPH-400-154LVC 1.5

(0.059)

140

295

(11.6)

LPH-400-164LVC 1.6

(0.063)

150

300 (11.8)

LPH-400-184LVC 1.8

(0.071)

LV4 0.1

1(1.1/16)

190

270 (9.5)

320 (12.6)

LPH-400-134LVB 1.3

(0.051)

95

320

(12.6)

LPH-400-144LVB 1.4

(0.055)

110

325

(12.8)

LPH-400-154LVB 1.5

(0.059)

LVB 0.1

(1.0/14)

125

235 (8.3)

335 (13.2)

LPH-400-134LVX 1.3

(0.051)

120

300(11.8)

LPH-400-144LVX 1.4

(0.055)

130

310(12.2)

LPH-400-154LVX

Gravity

1.5 (0.059)

LVX 0.11(1.1/16)

0.07

(0.7 /10)

145

275(9.8)

330(13.0)

G1/4(Air)

(NPS1/4)

M16

×1.5

(Fluid)

380

(0.84)

※1. Atomizing air pressure means air pressure at gun inlet when trigger is pulled and air flows.

This Anest-iwata spray gun kit complies to ATEX

regulations 94/9/EC,

Protection level

Ⅱ 2 G X,Suitable for use in Zones 1 and 2.

X marking

Any static electricity discharge from the spray gun

is to be diverted to the grounded the conductive

air hose as stipulated

.

LPH-400-LVB/-LVC/-LVX

■Important specifications

Max. Pressure

0.68MPa / 6.8 bar / 98 PSI

Noise level

69.4 d B (A)

Spray condition

Recommended

Measuring point

1m backwards from gun,

1.6 m height

Max. Temperature

Atmosphere

5℃~40℃

This manual contains IMPORTANT WARNINGS

and INSTRUCTIONS.

Equipment in this manual is exclusively for painting purposes.

Do not use for other purposes.

The operator shall be fully conversant with the requirements stated in this

instruction manual including important warnings, cautions and operation and

correct handling.

Read and understand the instruction manual, before use and retain for

reference.

Advertising