ATAS Edge Trim - Manual

ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODUCT NAME
Perimeter Edge Roofing
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
website: www.atas.com
email: [email protected]
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85201
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
Perimeter Edge Trim coping and fascia are
engineered systems applied to the edge of
a roof to weather proof the perimeter of low
slope roofing systems. These systems include
Embedded Fascia – Box Style, Embedded
Fascia- Gravel Stop Style, Edge-Lok Fascia,
Rapid-Lok Fascia and Rapid-Lok Coping.
Composition and Materials:
Embedded Fascia – Box and Gravel Stop Styles,
and Rapid-Lok Fascia are available in .040 and
.050 Aluminum; 24 gage Metallic Coated Steel.
Edge-Lok Fascia is available in .050 Aluminum;
24 gauge Metallic Coated Steel. Rapid-Lok
Coping is available in .050 and .063 Aluminum;
24 gauge Metallic Coated Steel.
Size:
Standard lengths are fabricated to 10’-0”.
Consult the ATAS Order/Specification forms for
specific sizes.
Color & Finish:
A choice of 30 colors is available in KYNAR
500® PVDF or HYLAR 5000® PVDF finish. Clear
anodized Aluminum is also available. Texture
may be smooth or stucco embossed.
4. TECHNICAL DATA
Kynar 500® or Hylar 5000® finishes tested by
paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and ASTM D
5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Tested in accordance with ANSI/SPRI ES-1
Wind Design Standard
Factory Mutual Approved
Galvanized Steel; ASTM A 653
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
5. INSTALLATION
Embedded Fascia system: uses a continuous
pattern of offset holes in the roof flange
through which two plies of modified bitumen
roofing membrane can be bonded to each
other. Roofing plies bond together through
metal flange to create exceptional seal.
Edge-Lok Fascia system: is a decorative metal
fascia with a continuous metallic coated steel
spring cleat designed to terminate single-ply
roofing at the perimeter.
Rapid-Lok Fascia system: Features a two-
piece design with a snap-on fascia and rigid
termination bar to assure wind and water stay
out of the roof membrane.
Rapid-Lok Coping system: is a snap-on coping
designed specifically for parapet walls. The
20 gauge metallic coated steel hold down
cleat has pre-punched fastener holes for quick
installation.
Installation manuals or hands-on training via
seminars are available through ATAS. Visit
www.atas.com for more information.
6. AVAILABILITY AND COST
Availability:
Perimeter Edge Trim is available through
ATAS product distributors. A complete line of
related components is available to complete
the Perimeter Edge Trim System. In addition, a
complete line of rainware can be supplied by
ATAS to complement the project.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a fluoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF finish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.
8. MAINTENANCE
Perimeter Edge Trims are virtually
maintenance free. Surface residue is
easily removed by conventional cleaning
methods. Minor scratches my be touched
up with matching pain, available from ATAS
International, Inc.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.construction.com
• www.atas.com
Additional product information is available
from the manufacturer upon request.
Perimeter Edge Roofing TM is a trademark of ATAS International, Inc.
KYNAR 500 ® is a registered trademark of Arkema.
HYLAR 5000 ® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT631
Embedded Fascia -
Boxed Style
Embedded Fascia -
Gravel Stop
Edge-Lok Fascia
Rapid-Lok Coping
Rapid-Lok Fascia
Embedded Fascia -
Boxed Style
Embedded Fascia -
Gravel Stop
Edge-Lok Fascia
Rapid-Lok Coping
Rapid-Lok Fascia