Baldwin Single Cylinder Deadbolt User Manual

Prestige series, Template plantilla, Adjust and install latch

Advertising
background image

TEMPLATE

PLANTILLA

MEASURE

BACKSET

1. Adjust and install latch

Measure your door backset as shown.

Note, for a 1-1/2” (38mm) diameter

hole, test if latch extends and retracts.

Chisel out area if required.

Install turnpiece.

INTERIOR

Install latch with 11/16” screws.

Install exterior cylinder assembly.

Not to be used on 1 1/2” holes.

2. Install trim

EXTERIOR

Ensure the latch is inserted

with the word “UP” on top.

3. Install strike

1/8” pilot holes may be required.

If backset of door measures 2 3/4” (70mm),

adjust latch by rotating face as shown.

Single Cylinder Deadbolt Installation Instructions

Lifetime Warranty
This product comes with a lifetime mechanical and finish warranty to the

original residential user against defects in material and workmanship as

long as the original user occupies the residential premises upon which the

product was originally installed. This warranty DOES NOT COVER scratches;

abrasions; deterioration due to the use of paints, solvents, or other chemicals;

abuse; misuse; or product(s) used in commercial applications. Upon return

of a defective product to Baldwin Hardware Corporation, Baldwin may repair

or replace the product or refund the purchase price. Baldwin is not liable for

incidental or consequential damages. Some states do not allow the exclusion

or limitation of incidental or consequential damages, so the above exclusion

may not apply to you. This warranty gives you specific legal rights and you

may also have other rights that vary from state to state. If a mechanical or finish

defect occurs, please call 1-877-315-7853 in the U.S. and Canada or return it

to Baldwin Hardware Corporation, Consumer Services, 19701 Da Vinci, Lake

Forest, California 92610.For customers outside of the U.S. and Canada, claims

under this warranty must be made only to either the place of purchase or to the

listed importer.

Prestige Series

www.baldwinprestige.com

Advertising