BARSKA AU11590 Red Laser w/160 Lumen Flashlight User Manual

Red laser flashlight sight, 5mw red laser with 160 lumen flashlight, Danger

Advertising
background image

WARNING

:

AVOID EXPOSURE
LASER RADIATION IS EMITTED
FROM THIS APERTURE

DANGER

This product complies with 21 CFR
chapter 1, subchapter L.

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

Max Output<5mW

WAVELENGTH 650(±)nm

Class IIIA Laser Product

FDA NO.:0620836-00

BARSKA OPTICS
1721 Wright Ave.
La Verne CA, 91750 USA
www.barska.com

5mW Red Laser w/160 Lumen
Flashlight w/Quick Release
Mount
Model: AU11590
Made In China
Manufactured on 01/2011

WARNING: BE CERTAIN THAT YOUR FIREARM IS NOT
LOADED AND POINTED AWAY FROM YOU IN A SAFE
DIRECTION

ATTENTION: THIS BARSKA LASER SIGHT IS A POWERFUL
TARGETING DEVICE THAT REQUIRES SPECIAL ATTENTION WHEN
OPERATING. CAREFULLY READ THE FOLLOWING INSTRUCTIONS
AND SAFETY PRECAUTIONS BEFORE USING THIS PRODUCT.

CAUTION: UNAUTHORIZED USE MODIFICATIONS
OF ADJUSTMENTS OR PERFORMANCE OF
PROCEDURE OTHER THAN SPECIFIED HEREIN
MAY RESULT IN DANGEROUS/HAZARDOUS
RADIATION EXPOSURE.

LASER LIGHT: AVOID DIRECT EYE EXPOSURE.

WARNING KEEP OUT OF REACH OF CHILDREN.

DO NOT POINT LASER AT PEOPLE, PETS,
SHINY/HIGHLY REFLECTIVE SURFACES,
AIRPLANES OR ANY OTHER OBJECT NOT
INTENDED FOR DESIGNATED USE.

NOTE: When mounting laser sight, place weapons
safety on and unload all ammunition from the firearm.
When mounting laser to weapon keep the laser in off
position to avoid exposure to eyes.

Battery Installation

Before using unit, you must first insert the supplied CR123A
batteries. Remove the Battery Cap (5) by pushing down and
out on the Battery Cap Retainer (4) until it snaps out of place.
Insert batteries (see image) and snap Battery Cap (5) back on
to the unit.

Mounting

To mount the Red Laser with
Flashlight onto a Picatinny/Weaver
rail: Position the unit in front of the
rail so the Flashlight is facing in the
same direction as the muzzle of the
firearm. Align the grooves on the
Red Laser with Flashlight weaver style mount with the grooves on the rail of
the firearm. Depress the Quick Release Tab (1) and slide the unit straight back
and until the unit locks into place. The Red Laser with Flashlight Tactical is
now securely mounted.

Dismounting

To dismount the Red Laser with Flashlight: Grasp the unit and depress the
Quick Release Tab (1). Slide the unit forward until it has cleared the rail on the
firearm completely.

©2011 BARSKA

®

|

La Verne, CA 91750

|

www.bar ska.com

6/11

BC182

Switch Operation

On the rear of the unit there is push-button On/Off Switch (6) and a Selector
Switch (8). The two switches are used in conjunction with one another. Push
the On/Off Switch (6) down, to turn the unit on continuously. Push On/Off
Switch (6) again and the unit will turn off.

The Selector Switch (8) has three settings. With the On/Off Switch (6) in the
“on” position, The Selector Switch (8) can be flipped to the left to turn on both
the laser and the flashlight on, flip to the next position to turn the flashlight on,
and flip to the next position to turn the laser on

When not in use, turn Selector Switch (8) to the off position. Push On/Off
Switch (6) so that the unit will be turned off.

Laser Windage and Elevation Adjustments

To get maximum windage and elevation adjustments, loosen the windage and
elevation Allen bolts until the threads are visible. Do not remove the bolts. The
laser is now ready to be zeroed. To adjust the windage of the Laser, use the
provided Allen wrench into the head of the Windage Adjustment (10). Turn the
Windage Adjustment (10) clockwise to adjust left and counter clockwise to
adjust right. To adjust the elevation, insert the provided Allen wrench into the
head of the Elevation Adjustment (11). Turn the Elevation Adjustment (9)
clockwise to adjust down and counter clockwise to adjust up. See chart below

Attaching Cable Switch

To bypass the On/Off Switch (6) insert the included cable switch into the Cable
Switch Receptacle (7). With the On/Off Switch (6) in the “on” position, use the
Selector Switch (8) to desired setting and push down on the pressure sensitive
button.

Storage

Turn Selector Switch (8) to the off position. Push On/Off Switch (6) so that the
unit will turn off. If necessary remove cable switch. Remove batteries when
storing for extended periods of time. Store unit in a cool dry area.

Specifications

Flashlight:
Flashlight power output:
Battery type:
Laser maximum output power:
Wavelength:
Length:
Weight:
Height:
Body width:

3 watt LED
160 lumens
2, CR123A Lithium Batteries
<5mW
650(±)nm

3.62 inches

4.2oz

2 inches

1.57 inches

Red Laser Flashlight Sight

1. Quick Release Tab
2. Flashlight Housing
3. Laser Housing
4. Battery Cap Retainer
5. Battery Cap
6. ON/OFF Switch
7. Cable Switch Receptacle
8. Selector Switch
9. Elevation Adjustment
10. Windage Adjustment

4

5

6

1

2

3

7

8

9

10

Parts of the Unit

C

CC

C

CC

Windage

Right

Left

Up

Down

Elevation

CC: Counter Clockwise

C: Clockwise

NOTE:
The Red Laser with Flashlight
will securely mount on most
Picatinny/Weaver rails, but not
all (depending on the location of
the cross-slots on the rail itself)

5mW Red Laser with 160 Lumen Flashlight

Advertising