I-View CP-3160RD Real Time Recording DVR Card - Manual

1
CP-3160RD Deluxe DVR Board Hardware Manual (V1.6)
This section details the installation of your CP-3160RD Deluxe DVR board and how to make the necessary
connections. You may install another Daughter Card into a PC to reach 32 Video input. The primary one is
referred as CP-3160RD Deluxe 0, the other one will be called CP-1605RD Daughter card. Before you start,
please make sure that your PC is off, and the power cable is unplugged.
The DVR system is called CP-3320RD Deluxe when combine the CP-3160RD Deluxe 0 and CP-1605RD
Daughter card together. The CP-3320RD Deluxe can supports 32 video input.
The description of CP-3160RD Deluxe 0 (Fig1) and CP-1605RD Daughter Card (Fig1-1) pins and sockets:
1: Video input –DB25 pin to connect the D-Sub BNC cable for video input.
2: TV out –S connector for single and split video output.
3: Video looping- Connect to a video looping board for video loop-out.
4: 40 Pin (2x20) male connector – Connect to the 1605RD Daughter Card.
5: EM_B – Panic button socket (CP-3160RD Deluxe 0 only)
6: RESET- System failure socket, connect to the “ Reset “ socket of PC Motherboard. (CP-3160RD Deluxe 0)
7: LED – The indicator of auto reboots function.
8: Sensor connector-Connect to the sensor cable of the remote controller. (CP-3160RD Deluxe 0 only)
9: Audio in - Connect to an audio board for audio input. (CP-3160RD Deluxe 0 only)
10: J_USB – Connect to USB cable to the USB port of PC Motherboard.
11: Jump– DVR number selection. The CP-3160RD must select the Card 1 when combine with CP-1605RD.
12: 4 Pin power socket – The socket for power input from power supply of the PC. (CP-1605RD only)
(Fig 1) (Fig 1-1)