I-View CTX-104PVAD Multi-signals Transmission System - Manual

1
Packing Checklist:
Carefully unpack and check the package box if the following items are included:
CRX-104PVAD Receiver x 1 pc.
CTX-104PVAD/AC or CTX-104PVAD/DC Transmitter x 1 pc.
Installation Manual x 1 pc.
Power core x 1 pc.
Product Features:
All in One: Transmit the Power/Video/Audio/Data (RS-485/RS-422) signals via a single coaxial cable.
High Power: Provide AC24V/2A (DC24V/2A optional) or DC12V/4A high current power.
Long Distance: Up to 600M (RG-6) /1000 M (RG-11) transmission distance via single coaxial cable.
Surge Protection: Built-in Power/Video/Data surge protector for best outdoor usage.
Interference: Superior interference immunity.
Indicator: LED indicator shows the status of Power, Video and Data transmission.
Rack Mount: Supports 1U 19"rack mount via RMP-319 rack mounting panel.
Secure: Secure the video/audio signals by RF Modulation transmission.
Safety: Safer power construction via AC80V.
Product Overview:
1.)
Audio in (BNC connector): To connect audio
signal input.
2.)
Video in (BNC connector): To connect video
signal input.
3.)
Terminal blocks: To connect with PTZ camera;
the electrodes of the “+” & “-“ need to be matched
correctly with the electrodes of the PTZ camera
(e.g. + to (+) RS485/422 and - to (-) RS485/422).
4.)
RF out/ AC in (F connector): Provide video/
audio /data signal output and AC power input.
5.)
LED Data indicator: To indicate the status video and
RS-485/422. The status of LED is -- LED on: Normal, LED flash: Transmission error
6.) Surge protector: Connect to the earth-ground by shorter than 10 feet 16AWG or thicker cable.
7.) Power output: CTX-104VAD/AC provides AC 24V/2A (DC24V/2A Optional); CTX-104VAD/DC
provides DC12V/4A power output.
8.) LED Power indicator: To indicate the status power-on or power-off of CTX-104PVAD.
The status of LED is --- LED on: Normal, LED flash: Power not enough, LED Off: No power.
Power/Video/Audio/Data Transmission System Installation Guide
V1.3
--- CTX-104PVAD ---
1 2 3 4 5
6
7
8