Actiontec SBT100U - Manual

Wireless
Display Kit
Model # SBWD100A & Model # SBT100U
Installation Guide
This Installation Guide will walk you through the easy steps
to set up your ScreenBeam Wireless Display Receiver and
USB Transmitter. During this process, we’ll show you how to:
A Install the Receiver
B Install the Software
and USB Transmitter
C Pair the Receiver and
USB Transmitter
NEXT
© 2013 Actiontec Electronics, Inc. ScreenBeam and the Actiontec logo are
registered trademarks or trademarks of Actiontec Electronics, Inc., in the U.S. or
other countries. All other names are properties of their respective owners.
ScreenBeam
Step
3
A new screen appears.
Select the Receiver, then
click Connect.
Step
4
A PIN appears on your
HDTV screen.
Step
5
Enter the PIN in the
ScreenBeam screen on the
laptop/PC within 60 seconds, then
click Next.
The ScreenBeam Transmitter and
Receiver are now paired.
You should see the screen of the
laptop/PC on the HDTV.
Go to www.actiontec.com/screenbeam to register your
product and for more information, including:
• Videos • FAQs • User Manual • Wall Mount Templates
For Miracast or Intel WiDi Devices
• Miracast: To obtain an updated list of compatible Miracast
devices and setup instructions, go to:
http://www.actiontec.com/wirelessdisplay
• WiDi: Make sure the WiDi system can support the required
WiDi software (3.5 or higher). To obtain the latest WiDi soft-
ware and drivers, go to:
http://www.intel.com/go/wirelessdisplayupdate
IMPORTANT: Federal Communication Commission (FCC) Radiation
Exposure Statement:
This EUT is compliance with SAR for general population/uncontrolled exposure
limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the
measurement methods and procedures specifi ed in OET Bulletin 65 Supplement
C. This equipment should be installed and operated with minimum distance
1.5 cm between the radiator and your body.
Frequently Asked Questions
Do I need to install ScreenBeam software or the USB
Transmitter included with the ScreenBeam Kit to connect to a
Miracast or Intel WiDi device?
No. For Miracast devices, refer to the user guide of the device’s
manufacturer. For WiDi-capable systems, make sure your system
driver and WiDi software are up-to-date.
My video quality is poor, or I’m seeing a mosaic display on my
HDTV. What should I do?
First, make sure the laptop/PC meets the recommended system
requirements. If you’re seeing a constant mosaic picture,
disconnect, then reconnect the ScreenBeam connection. Also,
make sure the Wireless Display Receiver is not hidden inside a
cabinet, as this can reduce performance.
ScreenBeam displays a screen that seems to be larger than my
TV can handle. How can I fi x this?
Hover over the ScreenBeam icon in Windows system tray at
the bottom right of the desktop. A menu will appear. From the
menu, select Preferences, then adjust the screen size.
How can I update my Wireless Display Receiver fi rmware?
Go to http://www.actiontec.com/screenbeam to download
the latest fi rmware and refer to the upgrade instructions
posted online.
I’ve inserted the software CD into the CD-ROM drive, but it
doesn’t install. What should I do?
In Windows Explorer, browse to the CD-ROM drive (e.g., D:), then
locate and double-click on the “Setup.exe” fi le.
Should I be concerned if Windows’ fi rewall or anti-virus
software warns that ScreenBeam is trying to open a port?
ScreenBeam requires Windows to temporarily open a port to
stream content to the TV. Click Allow when the message appears.
How can I update my ScreenBeam Wireless Display software?
Open the ScreenBeam Wireless Display application. Right-click
on the ScreenBeam Receiver you’ve previously connected to and
select “Check for updates…” . Make sure the laptop/PC is
connected to the Internet.
My laptop/PC displays the following message: “Color scheme
has been changed.” Is this a problem?
No. Select “Keep the current color scheme and don’t show this
message again.”
Why am I unable to play a DVD or Blu-ray disc when connected
to ScreenBeam?
Currently, ScreenBeam does not support the streaming of
protected content such as DVD/Blu-ray movies, TV shows, etc.
What should I do if the ScreenBeam Wireless Display software
cannot connect or pair with ScreenBeam Receiver?
Reboot the laptop and power cycle the Wireless Display Receiver.
Also, try selecting a diff erent wireless channel before connecting.
To do this, from the “Add a Receiver” screen, click on the wireless
channel drop-down menu, then select a diff erent wireless channel.
Part # 0530-0683-001
This product has a 1-year Limited Hardware Warranty and 90-day free software
updates from date of purchase.
Go to http://www.actiontec.com/products/warranty.php for more information.