Actiontec SBWD100A Education Edition - Manual

Wireless Display
Receiver
NEXT
TM © 2014 Actiontec Electronics, Inc. All rights reserved. ScreenBeam and the Actiontec logo
are trademarks or registered trademarks of Actiontec Electronics, Inc., in the U.S. or other
countries. All other names are properties of their respective owners.
This product has a 1-year Limited Hardware Warranty and 90-day free software updates from date of purchase.
Local Law
This Limited Warranty Statement gives the customer specific legal rights. The customer may also have
other rights which vary from state to state in the United States, from province to province in Canada, and
from country to country elsewhere in the world.
To the extent that this Limited Warranty Statement is inconsistent with local law, this Statement shall be
deemed modified to be consistent with such local law.
Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the
customer.
Go to http://www.actiontec.com/products/warranty.php for more information.
Go to http://www.actiontec.com/support for product
support, updates, and more information including:
• Firmware Updates • Troubleshooting • Registration • FAQs
Part No.: 0530-0741-000
C Product Support & Additional Information
Declarations of Conformity (DoC)
To obtain the complete DoC form in softcopy, go to the
Actiontec Electronics Declarations of Conformity EU/EEA website
at http://international.actiontec.com/support/doc
For GNU General Public License (GPL) related information, go to
http://opensource.actiontec.com
The symbol at right is placed in accordance with the European
Union Directive 2002/96 on the Waste Electrical and
Electronic Equipment (the WEEE Directive). If
disposed of within the European Union, this product
should be treated and recycled in
accordance with the laws of your jurisdiction
implementing the WEEE Directive.
Installation Guide
A Install the Receiver
1 B Connect Using Intel WiDi App
2 B Connect Using Windows 8.1 or Higher
3 B
Connect Using WiFi Miracast-Enabled Device
C Device Management
C
Device Management (continued)
C
Device Management (continued)
Click the “ Apply” button to confirm new settings. New settings take
effect immediately.
Step
2
Enter the network security key: “12345678”.
Step
3
Step
4
The Username is “Administrator” and Password is
“Actiontec” by default.
PIN Enforcement
Select “Off ” to disable the PIN enforcement function. PIN entry
or PBC is required when connecting your device to the receiv-
er for the first time.
Select “ On” to enable the PIN enforcement function. In this
case, you must enter a PIN code on the device connecting to
the receiver for the first time. When this function is enabled,
the system provides two PIN generation methods: Random
and Static.
Random: A PIN code is generated randomly by the system
and displayed on the connected HDTV/projector.
Static: Users can enter seven (7) digits in the Static box,
then click the “Apply” button, and the system generates an
eight (8) digit PIN and display it on the Static PIN field. This
PIN will not be displayed on the connected HDTV/projector.
HDMI Power Management
Select the Features tab, and you can find the HDMI Port Power
management feature. There are three states for the HDMI port
when the receiver is idle: Always On, Screensaver, and HDMI
Off.
C
Device Management (continued)
Click the “ Apply” button to confirm new settings. New settings take
effect immediately.
Always On: Selecting this option, the HDMI output is turned
on all the time.
Screensaver: Selecting this option, the system will run the
screensaver after the defined Wait time expires. Users can
define the Wait time (2, 10, or 30 minutes) in the Wait box.
HDMI Off: Selecting this option, the HDMI output will be turn
off after the defined Wait time expires. Users can define the
Wait time (2, 10, or 30 minutes) in the Wait box.
Firmware Upgrade
Select the Firmware Upgrade tab to display firmware upgrade
features. Download the latest firmware from “
https://upgrade.
actiontec.com ” before upgrading the receiver.
C
Device Management (continued)
Follow the steps below to upgrade the receiver,
Step
1
Select “ Enable” in the Firmware Update dropdown box.
Step
2
Click the “Browse” button beside the Firmware Package
box and select the firmware (install.img) you have downloaded.
Step
3
Click the “Apply” button to upload the firmware file to
the receiver. This process may take several minutes.
Step
4
After the file is uploaded successfully, the receiver will
start firmware upgrade automatically.
Select the Features tab, and
you can find the Force PIN
Pairing on First Connection
feature.
This Installation Guide will walk you through the easy steps
to set up your ScreenBeam Pro - Education Edition Wireless
Display Receiver. During this process, we’ll show you how
to:
Model#: SBWD100A EDU
Note: The username and password are case sensitive.
Access the URL address (“http://192.168.51.1“ in this
example) that is displayed on the Ready To Connect screen with
a web browser on the laptop.