Actiontec MWTV200R, MWTV200T Installation Guide - Manual

MyWirelessTV allows you to place an HDTV anywhere in your
home because it transmits your video and audio wirelessly.
Make sure you identify which ‘source device’ that you want to
connect to the Transmitter. Video from that ‘source device’ will
be transmitted to your receiver box(s).
INSTALLATION for the MyWirelessTV is EASY. Both units come
pre-paired to work with each other. All you need to do is connect
the cables according to the diagram or, if you want, follow the
detailed step-by-step instructions.
A How MyWirelessTV Works
Step
1
b
Plug the larger end of the
power supply into a power outlet.
Step
1
c
Make sure the Power Light
on the Transmitter is SOLID Green.
Step
1
a
Get one power supply from
MyWirelessTV Kit. Plug the smaller end
of the power supply into the 5VDC
port on the back of the Transmitter.
B Connect the Cables
Step
3
a
Get an HDMI cable from
MyWirelessTV Kit. Plug one end of this
HDMI cable into the HDMI Input
port on the back of the Transmitter.
Step
3
b
Plug the other end into
the HDMI port on the Source Device
from Step 2.
Step
5
d
Turn on the HDTV near the Receiver. Make sure you
have selected the correct source input. You should be able to see
video from the source device.
Step
2
a
Unplug the HDMI cable from
the back of the Source Device (ie: a
cable/ satellite set-top box, Blu-ray
player, etc.). Plug this free end of the
HDMI cable into the HDMI Out to TV
port on the back of the Transmitter.
Please note this step is optional. You
are not required to use the HDMI out
to TV port on the Transmitter.
Step
4
b
Plug the smaller end of the
power supply into the 5VDC port on
the back of the Receiver.
Step
4
c
Plug the larger end of the
power supply into a power outlet.
Step
4
a
Get the second power
supply from MyWirelessTV Kit. Go to
the HDTV that you want to connect.
Step
4
d
Make sure the Power Light
on the Receiver is SOLID Green.
Step
4
e
Wait 30-45 seconds. All 3
lights on the Receiver should be
GREEN.
Flip this Quick Start Guide over to continue
NEXT
Note: Only use power adapter, Leader Electronics Inc., Model MU12-G050200-A1
Note: If the Sync Light is SOLID Orange, wait another 10-15 seconds. It should turn
GREEN. If the Sync Light stays Orange or Red, you will need to manually pair the units.
Please refer to the user manual for more information. Note: The Sync light may blink
If you are using the Transmitter and Receiver in the same
room, please skip to step 3a
Up to
150 ft.
range*
RECEIVER
MWTV200R
TRANSMITTER
MWTV200T
HDTV
(Optional)
(Optional)
(Optional)
HDTV
POWER
OUTLET
POWER
OUTLET
SOURCE
DEVICE
1
2
3
4
5
7
6
Please refer to
this illustration
while connecting
cables
Step
5
a
Get the second HDMI cable
from MyWirelessTV Kit.
Step
5
b
Plug one end of this HDMI
cable into an HDMI port on the HDTV.
Step
5
c
Plug the other end of the HDMI
cable into the HDMI Out to TV port on
the back of the Receiver. The HDTV
should now be connected to the Receiver.
CAUTION
Do NOT place the MyWirelessTV
Transmitter or Receiver on top of
or near a heat-generating source.
*Range subject to change. Walls, ceilings
and floors may reduce the wireless range.
MWTVkit_QS12_QS sngl pnl 9/8/11 12:27 PM Page 1