ASB Heating Elements Ltd. Radiant Heaters - Manual

Radiant Heaters
G1
FS and FSA series
for applications where fast heater response required for
heat sensitive products or webs.
• heats all colours uniformly
• unique serpentine metallic elements
• 25-45 second heat-up/cool-down
• element temperature to 2100° F
• up to 55 watts/in
2
• can be mounted in any plane
• 5” thick aluminium case
• maximum width - 18 inches
• maximum length - 24 feet
• optional built-in thermocouple
F series
for applications where ultra fast heater response required
extremely uniform heat pattern for sensitive products or webs.
• heats all colours uniformly
• unique corrigated metallic elements
• 10-15 second heat-up/cool-down
• element temperature to 1550°F (2.5 micron peak)
• up to 45 watts/in
2
• can be mounted in any plane
• 5” thick aluminium case
• maximum width - 18 inches
• maximum length - 16 feet
• optional built-in thermocouple
• J or K thermocouple (optional)
CB series Black Glass (shown)1350°F (2.0 micron peak)
CV series Opaque Glass (not shown)1600°F
(2.5 micron peak)
highly efficient long and medium wavelength
infrared, heats all colours equally well, except
pigments containing carbon black, which have
higher absorption rates.
• 3 – 5 minute heat up
• 5-10 minute cool down
• uniform full heat area
• up to 25 watts/in
2
• can be mounted in any plane
• 3” thick aluminium case
• maximum width - 18 inches
• maximum length - 6 feet
• J or K thermocouple (optional)
Figure 218
Figure 219
Figure 220