C.E. Niehoff & Co. N9637 Regulator Bracket Installation - Manual

N9637
Regulator Bracket Assembly
for N1380-4 Alternators
Installation Instructions
C. E. Niehoff & Co.
BRUSHLESS ALTERNATORS
Regulator
➛
1. Install regulator bracket as shown in Figure 1.
2. Apply thread adhesive such as Loctite® 222 to screws before installing.
➛
#10-32 screw — torque to 7.4 Nm/65 lb. in.
(3 places)
Figure 1 – Regulator Mounting Bracket Assembly
C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline 800-643-4633
II0083C Page 1 of 1
➛
#8-32 x 0.75 screw —
torque to 3.4 Nm/30 lb. in.
(2 places)
➛
Cover plate
➛
Bracket
➛
➛
Alternator front housing
#8-32 x 0.50 screw —
torque to 3.4 Nm/30 lb. in.
(4 places)
➛ ➛
#8-32 x 0.38 screw —
torque to 3.4 Nm/30 lb. in.
(2 places)