Algoma Hardwoods PC-7 FD User Manual
Pc-7 fd, Hour door, Product features
1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
Door 23
8/10/08
Algoma Hardwoods, Inc. PC-7 is a
commercial door made with
particleboard core and skins.
Solid lumber outer stiles along
with Structural Composite
Lumber (SCL) rails and inner
stiles, are glued to the core prior
to cold pressing a 3-ply skin each side
of the core at ambient air temperature.
Algoma Hardwoods, Inc uses
only the better of two grades of
door core particleboard
conforming to ANSI Standard A208.1-
1989, Grade LD-1.
Algoma Hardwoods, Inc. uses
only skins with face veneers at
least .020” (0.5mm) thick at
12% moisture content.
Thickness
1
3
⁄
4
" (44mm) available FD
1
⁄
3
hour labeled.
Maximum size
Available prefit up to 4'0" x 8'0" (1219 x 2743mm), 8'0" x 8'0" pairs.
Stiles (Edge bands)
1
3
⁄
8
" (35mm) prior to factory trimming, glued to core. Alternates: ME–matching edges or CE–compatible edges.
Top & bottom rails
1
3
⁄
8
" (35mm) prior to factory trimming, glued to core; Structural Composite Lumber (SCL).
Core
Conforms to ANSI A208.1-1989, GRADE LD-1 covering mat-formed particleboard.
Faces
Skins 0.10" (2.5mm) of several veneer species. Faces shall be a minimum of .020" (0.5mm) at 12% moisture content.
Adhesives
Type II (interior).
Veneer matching
Available in pairs.
Details
Standard lites and louvers available not to exceed 40% of door area or 54" (1372mm) in length. Maximum glass opening on FD
1
⁄
3
hour doors is 1,296 sq. in. (0836m
2
) with wood beads and clips or metal vision panels. Applied mouldings also available.
Machining
Available with hinge and lock machining as well as other hardware.
Finishing
Available in 8 standard colors, and clear.
Warranty
For interior, limited lifetime warranty. Exterior not warranted.
Standards met or exceeded
WDMA I.S. 1-A Series, WOOD FLUSH DOORS, AWI Section 1300.
PC-7 FD
1
⁄
3
Hour Door
Product Features