Climax FF6200 FLANGE FACER - Manual

FF6200 FLANGE FACER
Rugged, Heavy-Duty Flange Facers
Rugged Machine Design
• Large, heavy-duty construction-grade
bearings provide powerful, rigid
performance throughout the entire
machine facing range, even machining
over bolt hole patterns.
• Oversized ring gear accommodates
extremely high torque levels for
challenging flange repair applications,
and these machines are able to generate
a phonographic finish.
Flexible and Versatile
• Both radial and axial feed is achieved
with a pneumatic feedbox. Manual
feeding for rapid positioning is also
possible.
• Feed rate is adjusted remotely at the
pneumatic conditioning unit, providing the
ultimate in operator safety and the flexibility
for feed rate adjustments even during
machining operations.
• Infinitely variable feed rates from
0.002-0.035 in. (0.05 - 0.89 mm)/rev
provides operational flexibility.
• Reversible feed box can be mounted to
provide either radial or axial feed.
• Turning and counterweight arms can both
be adjusted for the desired swing
clearance and machining range.
• Can be mounted both OD and ID
• Tool head can be rotated a full 360˚
(with ID chuck only) providing the ability
to create a variety of chamfers, O-Ring
grooves, lens rings and other angular
surfaces as needed.
• Pneumatic and hydraulic drive option
available.
• Chucking system can be removed to
allow the flange facer to be face-
mounted.
• Grinding option available for fine finish
work.
2014
FF62
03
Quick and Easy Setup
• Modular design allows many of the
machine components to be removed to
facilitate easier setup and storage.
• Unique chucking system minimizes parts
to greatly simplify machine setup and tear
down.
• Quick-adjust leveling feet make setup
quick and easy.