Hunter 21375 46 Stonington - Manual (Page 6)

6
42671-01 • 05/27/10 • Hunter Fan Company
To install a ceiling fan, be sure you can do the following:
• Locate the ceiling joist or other suitable support in ceiling .
• Drill holes for and install wood screws .
• Identify and connect electrical wires .
• Lift 40 pounds .
If you need help installing the fan, your Hunter fan dealer can direct
you to a licensed installer or electrician .
Gathering the Tools
You will need the following tools for installing the fan:
• Electric drill with 9/64” bit
• Standard screwdriver (magnetic tip recommended)
• Phillips-head screwdriver (magnetic tip recommended)
• Wrench or pliers
• Ladder (height dependent upon installation site)
Checking Your Fan Parts
Carefully unpack your fan to avoid damage to the fan parts . Refer to
the included Parts Guide . Check for any shipping damage to the motor
or fan blades . If any parts are missing or damaged, contact your Hunter
dealer or call Hunter Technical Support Department at 888-830-1326 .
Preparing the Fan Site
Before you begin installing the fan, follow all the instructions in
“Preparing the Fan Site .” Proper ceiling fan location and attachment
to the building structure are essential for safety, reliable operation,
maximum efficiency, and energy savings .
Installing Multiple Fans?
If you are installing more than
one fan, keep the fan blades and
blade irons (if applicable) in sets,
as they were shipped .
1 • Getting Ready