Allied Telesis AT-MC101XL User Manual
Dinrail mounting bracket installation guide, Overview, Verifying the package contents
PN 613-001150 Rev B
Page 1
PN 613-001150 Rev B
Page 1
PN 613-001150 Rev B
Page 4
PN 613-001150 Rev B
Page 4
DINRAIL Mounting Bracket
Installation Guide
Overview
This guide provides assembly instructions for assembling and
mounting a DINRAIL mounting bracket with one of the
following Allied Telesis products:
• AT-MC101XL, AT-MC102XL, AT-MC103XL and LH,
AT-MC104XL, and AT-MC605 Media Converters
• AT-MC1004, AT-MC1008/GB, AT-MC1008/SP, and
AT-GS2002/SP Media Converters
• AT-PC232/POE and AT-PC2002/POE
Media Converters
• AT-FS201, AT-FS202, AT-FS232, AT-FS232/1, and
AT-FS232/2 Media Converters
Verifying the Package Contents
Make sure that these components are included in your
package:
• 10 DINRAIL mounting brackets
• 20 M3 mounting screws
• 10 tie-wraps
• This installation guide
If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
Assembling a DINRAIL Bracket and Meda Converter
1.
Find your media converter model in Figure 1, 2 or 3 on
pages 2 and 3 as listed here:
Figure 1
• AT-MC101XL
• AT-MC102XL
• AT-MC103XL and LH
• AT-MC104XL
• AT-MC1004
• AT-MC1008/GB
• AT-MC1008/SP
• AT-GS2002/SP
• AT-FS232
• AT-FS201
• AT-FS202
Figure 2
• AT-MC605
Figure 3
• AT-PC232/POE
• AT-PC2002/POE
4.
For the AT-PC232/POE or the AT-PC2002/POE, install
the AC power cord and secure it with the retaining clip
provided with the media converter as shown in
Figure 5, “Securing AC Power Cord with the Retaining
Clip”.
Figure 5 - Securing AC Power Cord with the Retaining Clip
5.
Install the mounting bracket on the DINRAIL. As shown
in Figure 6, “Mounting the Bracket on the DINRAIL”,
the bracket may be oriented either with the bracket
screw above or below the DINRAIL.. Slide the hook
towards the DINRAIL until it is snug and then tighten
the bracket screw.
Figure 6 - Mounting the Bracket on the DINRAIL
Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication
may be reproduced without prior written permission from Allied Telesis, Inc.
1 2 3 4
10
100
SPEE
D
(Mbps
)
OFF
ON
AUTO
NEG
HAL
F
FUL
L
DUP
LEX
MOD
E
2
POR
T
1 2
2
100-240V
AC
~
1382
1519
DINRAIL Mounting Bracket
Installation Guide
Overview
This guide provides assembly instructions for assembling and
mounting a DINRAIL mounting bracket with one of the
following Allied Telesis products:
• AT-MC101XL, AT-MC102XL, AT-MC103XL and LH,
AT-MC104XL, and AT-MC605 Media Converters
• AT-MC1004, AT-MC1008/GB, AT-MC1008/SP, and
AT-GS2002/SP Media Converters
• AT-PC232/POE and AT-PC2002/POE
Media Converters
• AT-FS201, AT-FS202, AT-FS232, AT-FS232/1, and
AT-FS232/2 Media Converters
Verifying the Package Contents
Make sure that these components are included in your
package:
• 10 DINRAIL mounting brackets
• 20 M3 mounting screws
• 10 tie-wraps
• This installation guide
If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
Assembling a DINRAIL Bracket and Meda Converter
1.
Find your media converter model in Figure 1, 2 or 3 on
pages 2 and 3 as listed here:
Figure 1
• AT-MC101XL
• AT-MC102XL
• AT-MC103XL and LH
• AT-MC104XL
• AT-MC1004
• AT-MC1008/GB
• AT-MC1008/SP
• AT-GS2002/SP
• AT-FS232
• AT-FS201
• AT-FS202
Figure 2
• AT-MC605
Figure 3
• AT-PC232/POE
• AT-PC2002/POE
4.
For the AT-PC232/POE or the AT-PC2002/POE, install
the AC power cord and secure it with the retaining clip
provided with the media converter as shown in
Figure 5, “Securing AC Power Cord with the Retaining
Clip”.
Figure 5 - Securing AC Power Cord with the Retaining Clip
5.
Install the mounting bracket on the DINRAIL. As shown
in Figure 6, “Mounting the Bracket on the DINRAIL”,
the bracket may be oriented either with the bracket
screw above or below the DINRAIL.. Slide the hook
towards the DINRAIL until it is snug and then tighten
the bracket screw.
Figure 6 - Mounting the Bracket on the DINRAIL
Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication
may be reproduced without prior written permission from Allied Telesis, Inc.
1 2 3 4
10
100
SPEE
D
(Mbps)
OFF
ON
AUTO
NEG
HAL
F
FUL
L
DUP
LEX
MOD
E
2
POR
T
1 2
2
100-240V
AC
~
1382
1519