CEMB USA K22 (C) - Manual

I 0685 - 1 GB
Instructions for use
I
CONTENTS
1 - GENERAL 3
1.1 - GENERAL SAFETY REGULATIONS 3
1.1.1 - STANDARD SAFETY DEVICES 3
1.2 - FIELD OF APPLICATION 3
1.3 - OVERALL DIMENSIONS 3
1.4 - TECHNICAL DATA 4
2 - HANDLING AND LIFTING 4
3 - SETUP 5
3.1 - ANCHORING 5
3.2 - ELECTRICAL CONNECTION 5
3.3 - FITTING THE WHEEL FIXTURE SHAFT (SEE ATTACHED PROSPECTUS) 5
3.4 - FITTING THE WHEEL 5
4 - CONTROLS AND COMPONENTS 6
4.1 - AUTOMATIC DISTANCE AND DIAMETER GAUGE 6
4.2 - KEYBOARD AND DISPLAY 6
4.2.1 - FUNCTION MENU MANAGEMENT 7
5 - INSTRUCTIONS FOR USE OF THE WHEEL BALANCER 8
5.1 - USING THE GAUGE INSTALLED ON THE MACHINE 8
5.2 - AUTOMATIC DIMENSION SETTING 8
5.2.1 - USING THE EXTENSION FOR THE DISTANCE GAUGE 9
5.3 - WHEEL BALANCING 9
5.3.1 - MEASURING UNBALANCE 9
5.3.2 - CORRECTING THE UNBALANCE 10
5.4 - RECALCULATING UNBALANCE VALUES 10
5.5 - UNBALANCE OPTIMISATION 11
5.6 - AUTOMATIC MINIMISATION OF STATIC UNBALANCE 12
6 - SET UP 13
6.1 - AUTODIAGNOSTICS 13
6.2 - AUTOCALIBRATION 13
6.3 - MANUAL DIMENSION PRESETTING (use only in particular cases or for test) 14
6.3.1 - USING THE EXTENSION FOR THE DISTANCE GAUGE 14
6.4 - AUTOMATIC GAUGES 15
6.4.1 - RIM DISTANCE GAUGE 15
6.4.2 - DIAMETER GAUGE 16
7 - ERRORS 17
8 - ROUTINE MAINTENANCE 18
8.1 - REPLACING THE PROTECTION FUSES 18