ATEN CL-1200 - Manual (Page 21)

2. Installation
9
Connecting Up
Refer to the example installation diagram on the next page as you perform the
following steps:
1. Plug the 15 pin connector end of the KVM cable provided with this unit
into the CL-1200's KVM port.
2. Plug the keyboard, monitor, and mouse connectors of the KVM cable into
their respective ports on the Console Section of the KVM switch.
3. If you are installing an external console, plug your keyboard, monitor, and
mouse into their respective ports on the Console Section of the CL-1200.
The ports are color coded and marked with an icon for easy identification.
4. Plug the power cord into the CL-1200's power socket and into an AC
power source.
5. Power up your KVM installation.
6. Turn on the power to CL-1200.
cl1200_v2.book Page 9 Friday, March 10, 2006 1:43 PM