ATEN CL-1200 - Manual (Page 24)

CL-1200 User Manual
12
Closing the Console
To slide the console module back in, close the cover and do the following:
1. Pull the safety catches on the unit's side rails toward you and push the
module in until it stops.
2. Release the catches; pull the module slightly toward you; then push it all
the way in.
Note: The reason for the two step procedure is to minimize the chances of you
pinching your fingers when sliding the module in.
cl1200_v2.book Page 12 Friday, March 10, 2006 1:43 PM