Analog Way NeXtage 16 - Manual

Analog Way Worldwide
Europe, Middle East & Africa: +33 (0)1 81 89 08 60
The Americas: +1 212 269 1902
Asia Pacific: +65 6292 5800
www.analogway.com
Front and back rack mount for
the LiveCore-based systems
Two rack kits are supplied with the device:
• Front ears (Ref: 180469)
• Rear rack mount rail (Ref: 180489)
(Compatible with the following devices: NeXtage 16,
SmartMatriX Ultra, Ascender 32, Ascender 48)
SCREWS SUPPLIED
16 x M4x10
CAUTION!
Mounting using only the front rack ears is sufficient for fixed installations. Additional
support, such as the rear rack support or slide rails, is required for mobile applications,
and recommended for all.
To install the front ears:
Simply screw ears on each side of the device using 2 screws M4x10 (included), then place your unit into the
rack and screw the ears on the rack (screws not provided).