eLine Technology EYS-VMS eyStream User Manual Part2 - Manual

101
This section contains an example of configuring Sony Ipela Embedded Analytics. When configuring
the embedded analytics of other devices, you should use their descriptions in the interface of the
software package or, for more detail, the official reference documentation for these devices.
Procedure for Configuring Sony Ipela Embedded Analytics
You can configure Sony Ipela embedded analytics as follows:
1. Create a detection tool object.
2. Set the detection tool parameters.
3. Check triggering of the detection tool with the help of the Triggers ribbon (optional) (see the
section Checking the Triggering of a Detection Tool ).
4. Set the rules to be automatically executed when the detection tool is triggered (see the
section titled Configuring Automatic Rules ).
Creating a Sony Ipela Detection Tool object
To create a Sony Ipela detection object, you must perform the following steps:
1. In the branch of the Embedded Analytics object which offers a means of analyzing the
video image in the desired Sony Ipela video camera, click Create (1).
2. In the list that appears (2), select the type of embedded detection tool.
3. Click the Apply button.
When you do this, an Intelligent detection object appears in the Detection Tools list.
Creation of a Sony Ipela detection object is now complete.
Configuring a Sony Ipela detection tool
To configure a Sony Ipela detection tool, you must perform the following steps:
1. In the list of detection tools, highlight an Intelligent detection object (1).
2. From the Detect list, select the desired detection mode: Motion or Abandoned object (2)
.
eLineTechnology.com 303.938.1133