eLine Technology Covert 3-Ring Binder Camera - Manual

Covert 3-Ring Binder Camera
Kit Contents:
• 3-Ring Binder with Wireless 2.1MP
Camera
• Battery
• Wireless Router
• Ethernet Cable
• AC Power Adapter
• CD with IPcam Loader software and
manual
Step 1
Inside the 3-Ring binder, connect both power
wires to the battery. (Red to Red)
The battery will arrive fully charged. To
recharge the battery, connect the AC power
adapter to the barrel connection in the 3-Ring
Binder. A full charge takes approximately 8
hours.
Upon powering the camera, the camera starts
recording to its internal memory card when
triggered by motion.
Step 2
Place the covert camera in the desired location.
Step 3
Insert the supplied CD and run the installation
wizard to install the IPcam Loader software on a
computer that will be within 200 feet of the
covert camera’s location. A laptop is
recommended for portability.
To finish the installation, you will need internet
access.