Vmware esx 3.5, Creating and using the driver cd, Driver cd as a boot cd only – ATTO Technology FC-42ES User Manual
Page 20: Driver cd as an update cd only, Please refer to
16 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual
2
Extract the offline_bundle.zip from the ISO
image.
3
Use the Data Browser in the vSphere Client to
upload the ZIP file that was extracted from the
ISO to your ESX host.
Note
Alternatively, you can use a program like
WinSCP to upload the file directly to your
ESX host. However, it requires root
privileges to the host to perform the upload.
4
Log in to the ESX host as root directly from the
Service Console or through an SSH Client.
5
Place the ESX host in Maintenance Mode from
the vSphere Client.
6
Run this command from the Service Console or
your SSH Client to install the bundled package:
esxupdate --bundle=<name of bundled zip>
update
7
When the package has been installed, reboot
the ESX host by typing reboot from the Service
Console.
VMware ESX 3.5
For ESX Server 4.0 please refer to
Note
8 & 4Gb Celerity PCIe support only. PCIx
cards are not supported.
Creating and using the Driver CD.
1
Download the correct driver .iso file from the
VMware Drivers & Tools Download site.
2
Write the .iso image to a CD-ROM.
3
Use the CD-ROM as a Boot CD or an Update
CD.
Driver CD as a Boot CD Only
Note
The following procedure describes how to
use the driver CD as a boot CD. Use this CD
as a boot CD only if the new driver must
enable the target device on which ESX
Server 3.5 will be installed.
1
Place the driver CD in the CD-ROM drive of the
host machine.
2
Start the host machine.
3
When prompted for an upgrade or installation,
press Enter for graphical mode.
4
Choose the language you prefer.
5
Select a keyboard type.
6
After you are prompted to swap the driver CD
with the ESX Server installation CD, insert the
ESX Server 3.5 installation CD and continue
with ESX Server installation.
7
After ESX Server is installed and the system
reboots, log in to ESX Server.
8
Verify that the driver is installed successfully:
a. Run the esxupdate query command. A
message containing the information about
the driver appears.
b. View the PCI ID XML file in the
/etc/vmware/pciid/ directory. The driver
information is available in the file.
c. Check for the latest version of the driver
module in the following directory:
/usr/lib/vmware/vmkmod/
d. To verify that the driver is loaded and
functioning, enter vmkload_mod -l
command. The driver is listed in the
displayed list.
Driver CD as an Update CD Only
Note
The following procedure describes how to
use the driver CD to update or add the driver
on an existing ESX Server 3.5.
1
Start the ESX Server machine and log in to
service console as root.
2
Place the driver CD in the CD-ROM drive of the
server.
3
Mount the driver CD.
4
Change the directory to the
VMupdates/RPMS/ on the driver CD.