Specifications, 2. amplicenter specifications, Table 1-2. amplicenter specifications – AT&T PagePac Plus AmpliCenter User Manual

Page 16

Advertising
background image

Specifications

Table 1-2. AmpliCenter Specifications

Capacities

D20: up to 20 Watts total speaker load

D100: up to 100 Watts

D300: up to 300 Watts

Dimensions and

All models: 3-1/2" (8.9 cm) high x 19" (48.25 cm) wide x 5" (12.7 cm) deep

Weights

D20: 5 lbs (11 Kg) , D100 and D300: 6 Ibs (13 Kg)

RJ-11 Jack

Talk battery: 24 volts, loop start or ground start, negative voltage ring lead

Specifications

Impedence: 600

T e m p e r a t u r e

-10 to +40 deg. C. (14°F to 104°F) operational; to +50 deg. C. (122°F) with forced air

Range:

-20 to +70 deg. C. (28°F to 158°F) storage and shipment

Humidity Range:

5% to 95% (non-condensing) storage/shipment and operation

Environmental

Locate in an area free of excess moisture, corrosive gases, dust, and chemicals.

Requirements

Electrical

100-250 VAC, 50/60 Hz, lamp, 3-prong outlet separate ground

Outlet must not be controlled by an on/off switch

Grounding:

A. Use the power cord supplied with the unit, or an equivalent cord that meets applicable

safety codes. Do not cut or remove the third wire ground prong.

B. The attachment-plug receptacles in the vicinity of the product or system are all to be of a

grounding type, and the grounding conductors serving these receptacles are to be

connected to earth ground at the service equipment.

1-10

Overview

Advertising