Power, Circuit protection, Mounting – AT&T PagePac Plus AmpliCenter User Manual
Page 18: P o w e r
Advertising
Power
The rear panel of the AmpliCenter has a green LED which lights indicating
Power On.
One DC voltage derived from the PagePac Plus D-series AmpliCenter via
the interconnect cable (provided with the Controller) is the source for all
power required by the PagePac Plus Controller and any (optional)
attached Zone Expansion Modules.
Circuit Protection
Complete thermal and short circuit protection with automatic reset.
Mounting
Capable of mounting into a EIA 19" cabinet, free standing rack, or wall
mounting. Refer to Installation section 3.
2-2
Hardware Configuration
Advertising