Hydra-Tech SILT JETTING RING - Manual

SILT JETTING RINGS
For 3” 4” 6” and 8” Pumps
Attach to Pump Inlet Flange
These jetting rings are used in
conjunction with an external water
supply to agitate solid material into
suspension to allow the mixture to
be pumped. These devices bolt
directly to the bottom (inlet flange)
of the pump in place of the strainer
B0109
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail : [email protected]
External Water Supply
Fire Hydrant or
Separate Water Pump
Water Flow Required*
2” and 3” Pumps: 75 - 250 GPM
4” to 8” Pumps: 250 - 500 GPM
Water Pressure Required
50 - 150 PSI
* Input flow to be adjusted on-site
to achieve optimal results
S6T Pump with Jetting Ring
in use on a creek bed
dredging job
S4THL Pump with Jetting Ring
S3T Pump with Jetting Ring
Used on gold mining job