Atlas Sound TM-1 User Manual

Installation instructions, Tm-1 twin microphone mount, 1/ twin microphone mount communications products

Advertising
background image

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3332 • FAX: (800) 765-3435

©2002 ATLAS SOUND LP

Printed in U.S.A.

000202

ATS001112 RevA 2/02

PN 8286400

INSTALLATION INSTRUCTIONS

1/ TWIN MICROPHONE MOUNT
COMMUNICATIONS PRODUCTS

TM-1

TWIN MICROPHONE MOUNT

GENERAL DESCRIPTION

Twin Microphone Mount accessory designed for installation of two or three microphones on one Atlas
Sound microphone stand or on a podium or lectern top.

Model TM-1 Twin Microphone Mount accessory is designed for use with all Atlas Sound microphone
Stands equipped with

5

8

"-27 male thread.

For use in conjunction with two microphones when mounted on one microphone stand, a

5

8

"-27 lock-cap is

provided to cover the tube-mount and offer a finished appearance.

For use in conjunction with three microphones when mounted on one microphone stand, the tube-mount
is utilized to accommodate the center microphone and the lock-cap is not required.

For podium or lectern top installation, 1" off center mounting holes are provided.

For podium or lectern top installation with three microphones, the addition of an Atlas Sound model AD-12
adapter base is recommended to mount the TM-1 accessory and to accommodate the center microphone.

Total of 8" horizontal spacing is provided between the microphone mounts to assure optimum separation
for stereo-purposes or dual microphone application.

When additional horizontal spacing or height for mounting of the microphones is desired, Atlas Sound
GN-Series gooseneck accessories or AD Series tube adapters are recommended.

The Atlas Sound model TM-1 is 8–

3

4

" long, satin chrome finished, includes two

5

8

"-27 captive thumb screws

for fastening of the microphones or microphone holders.

Advertising