Ken Tool 39760-98 Strapwinder User Manual
Instructions for use
Instructions for Use
Instructions for Use
Instructions for Use
KEN-TOOL ● 768 E. North Street ● Akron, OH 44305
Toll Free: 888-536-8665 ● Fax: 800-872-4929 ● Phone: 330-535-7177 ● 330-535-1345
E-mail: [email protected] ● www.kentool.com
39760 STRAP WINDER
39760 STRAP WINDER
KT39760-98
NEW
QUICK WIND
QUICK TORQUE
QUICK TIRE CHECK
QUICK CHEATER BAR
1. Lay the cinch strap out, away from the trailer.
2. Position one of the holes in the barrel of the strap axle on top.
3. Hook the “spinner” of the Strap Winder down through that top hole,
from the outside, and twist it counter clockwise so that the tip of the
spinner sits in the end of the barrel.
4. Using your left hand to straighten and guide the strap, turn the strap
axle barrel with the Strap Winder using a push-pull motion of the right
arm.
5. After rewinding, use the notched end of the Strap Winder to firmly
secure the strap in place.
NOTICE:
The strap winder is not intended for use in securing cargo.
Always use approved leverage bars for securing cargo loads.