Cleveland Motion Controls ULTRA ISC SERIES SLIM CELL TRANSDUCER REV AA - Manual (Page 18)

U LTRA ISC S ERIES S LIM C ELL T RANSDUCER MAN-70434-0 R EV AA
2.3 C ABLING
Important: Most start-up problems are the result of mis-wiring or failure to reference the detailed
information in this manual. Additional information details can be found in the subsequent sections of this
manual and should be referenced before actual installation begins.
The connector for the ISC is a standard 4-pin M12 quick-connect connector keyed for DC operation.
Molded cordsets are readily available (see Table B) that can provide a direct connection between the ISC
equipped Tension Transducer, the required 24 VDC supply and tension controller (PLC, Tension Indicator,
Analog Input Module, etc). Ready-made PUR (polyurethane) jacketed cordsets are available in different
lengths and different connector orientation (straight or right-angle) from Cleveland-Motion Controls. It is
advisable to employ an overall outer shield (or place cable in a metallic conduit) for noise rejection in
environments with high levels of electromagnetic interference.
The wire gage should be a minimum of 24 AWG to aid in minimizing undesirable voltage drops. An
overall outer shield is required, with the shield connected to ground at the tension controller through as
short a connection as possible. The short connection is essential in minimizing parasitic inductance and
thereby maximizing the shielding effectiveness at high frequencies.
Exercise care in routing the cable to minimize electromagnetic interference from noise generating wiring
and equipment.
Table B lists the part numbers and descriptions for these available cordsets (Get from Web marketing):
Length Cordset Part
Number
Connector
Orientation
Cordset Part
Number
Connector
Orientation
3M X44-33975-010 Straight X44-33976-010 Right-Angle
8M X44-33975-026 Straight X44-33976-026 Right-Angle
16M X44-33975-052 Straight X44-33976-052 Right-Angle
24M X44-33975-078 Straight X44-33976-070 Right-Angle
32M X44-33975-105 Straight X44-33976-105 Right-Angle
48M X44-33975-157 Straight X44-33976-157 Right-Angle
Table B Cordset Part Numbers
P AGE 18 OF 42