Cleveland Motion Controls Brake EMAG 260 - Manual

Application Notes
•Lubricated for life (other internal lubrication not required).
The shaft should be lubricated upon assembly, to prevent seizing.
•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)
•The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
•For Engineering application, please contact our technical support.
•In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
Supply by 2 wires
Length = 250 mm
6 x screws CHC M8x80
at 60 ° on f 294
(user’s fixation)
f 315 h8
f 55 H7
16 P9
59.3
10
74
94
f 265 g6
14.5
f 265 g6
Nominal torque 350 Nm ft.lb 260
Minimal torque 3.5 Nm ft.lb 2.6
Coil resistance - 20°C Ohms 10
Rated current DC A 1.5
Rotor inertia 89.10-3 kg.m2 lb.ft 2 206.10-2
Weight 38 kg lb 84
Heat dissipation
W *
Continuously sustained
400
Specifications
* Heat dissipation is the mechanical power (P = cw) maximum allowable.
0
50
0
100
150
200
0.8 0.2 0.4 0.6 1.0 1.2 1.4 1.6
250
300
350
400
To
rque N.m
Current A
Cleveland-Kidder
®
ELECTROMAGNETIC
PARTICLE BRAKE
EMAG 260
• Easy Electric Remote Control
• Low Power Consumption
• High Level of Torque Stability
• Highest Torque Density
• No Dust
• Noiseless
• Easy Installation
• Maintenance-Free Bearing
+0.2
0