Clock Audio CAP 002 Line preamp User Manual

Line level pre amplifier cap002

Advertising
background image

Line level Pre Amplifier CAP002

The CAP002 is designed for use with an electret condenser microphone. When connected it will boost
the microphone audio output to a level that can be used to connect to a typical auxiliary line level
input commonly found on amplifiers / mixers or recorders requiring 0.5 Volts RMS (refer to your
external equipment instruction manual).

Power requirements

An external 12V to 24 DC supply with 100mA capacity (not supplied) is required / available from most
high street electrical retail outlets. Some DC adaptors are supplied with a plug already attached these
will need to be removed. Important that you careful check to ensure correct +/- polarity of the 2 cables
when connecting to the CAP002 pin 1 and 2 of PL2 screw terminals.

Connections

Microphone

CAP002 BOARD

M

To Mixer Input

AC/DC power adaptor
(not supplied)

Advertising