Laurel Electronics IP67 - NEMA-4X 1_8 DIN Wall-Mount Enclosure - Manual

LAUREL ELECTRONICS INC., 3183-G Airway Ave., Costa Mesa, CA 92626, USA • Tel 714-434-6131 • www.laurels.com 1
LAUREL
ELECTRONICS, INC.
1/8 DIN Wall-Mount Enclosure
Allows one 1/8 DIN meter to be bulkhead mounted.
Environmentally sealed to IP65 / NEMA-4X.
Features
• Sealed on all sides to IP65 / NEMA-4X
• Includes 1/8 DIN cutout
• Includes three 0.24" (6.1 mm) cable glands
• For 1/8 DIN instruments up to 5.30" (134 mm) deep
• Impact resistant polycarbonate
• Stainless steel hardware
• Easy to mount
• Sold as BOX2 with Model IPC IP67 / NEMA-4X splash-proof cover to protect
1/8 DIN meters from front.
Description
View into housing.
Models BOX1 is a wall-mount / bulkhead enclosure which pro-
vides environmental protection to IP65 / NEMA-4X for a 1/8 DIN
instrument. It comes with a 1/8 DIN (45 x 92 mm) panel and
accommodated instruments up to 134.5 mm (5.30") deep. This
includes all 1/8 DIN instruments by Laurel Electronics and most
1/8 DIN instruments by other manufacturers.
The instrument compartment is sealed on all sides. The two
clamshell halves of the case are joined by an O-ring. The rear
mounting holes are outside of the sealed compartment. Wire
feedthroughs are via three sealed cable glands, which accept
cables up to 6.1 mm (0.24") in diameter. Captive stainless steel
screws and high-impact polycarbonate provide durability.
The panel cutout can be expanded by the user up to 150 x
71 mm (5.90" x 2.80") or 131 mm x 110 mm (5.16" x 4.33") to
accommodate instruments larger than 1/8 DIN. Internal molded
standoffs with a height of 6.5 mm (0.25") can be snipped off by
the user if required.
Environmental Protection to IP65 / NEMA-4X
If the front panel of the instrument already provides environ-
mental protection to IP65 / NEMA-4X from the front, such as the
Laureate Series, then the entire instrument will be protected IP65
/ NEMA-4X once it is installed in Model BOX1.
Box2 wall-mount enclosure with IPC splash-proof cover.
Suitable for 1/8 DIN instruments up to 160 mm deep.
If the front panel of the instruments does not provide environ-
mental protection, but the instrument fits in a 1/8 DIN panel
cutout (45 x 92 mm), Model BOX1 may be ordered with the IPC
Splashproof Cover as Model BOX2, illustrated below. The
combination of Models BOX and IPC will provide IP65 / NEMA-
4X protection to 1/8 DIN instruments regardless of manufacturer,
provided that the instrument depth is less than 134.5 mm (5.30").