Laurel Metal 2599 ELECTRONIC VENDER User Manual
Page 4
L
OADING
Load cans from the top of the column, always alternating
the cans with cap left, cap right, etc. This ensures that the
cans will move freely down the column. Do not drop the
cans down the column as the cap may separate from the
can partially and cause a jam when dispensing.
The LED display will continually flash
&
when the empty switch activates, even though there will
be 1 can remaining. Coins will be returned if the vender
is sold out or if there is a power outage.
C
OIN
M
ECHANISM
R
EMOVAL
To remove the Coin Mechanism from the can column,
first unplug the wire harness that is on the right side of
the mechanism. Now loosen, but do not remove, the
2 mounting screws and lift the coin mechanism up to
remove it.
T
ROUBLE
S
HOOTING
6
3
Side Bar
2100-64
Magazine
Assembly
2599-B25
Circuit Board
399-19
Coin Mechanism
Slugbuster 2599-C30-SB
MA-800 2599-C30-MA
Microcoin 2599-C30-QL
Coin box
300-A69
Door
2599-D41
Security Frame
2599-82
LED Window
399-62
SYMPTOMS
LED display out
‘E__1’
displayed
Product vended at
less than vend price
Motor runs, no can
drop
Inserted coin rejected
LOOK FOR
Power loss
Check for 24 volts
(+/- 15%) power
at the circuit
board where
power comes in
Can stuck, jammed
Motor burned out
‘A’
value changed
from
‘.25’
MA800 coin acceptor
not programmed cor-
rectly
Cap separated from
can
Power loss
Coin acceptor
malfunction
1 can in column
NOTES
Check transformer.
See page 1 for power
requirements.
Check can that is
next to drop.
Not very likely.
See page 5 for
‘A’
value setting info.
See page 5 or MA800
manual.
Check transformer.
Slugbuster – change
sample Quarter.
MA800 – see
manual, LED should
be green on MA800.
Display will read
‘SOLD OUT’
.
Power down machine for 5-10 seconds and power back up
Power down machine for 5-10 seconds and power back up