LEADER LV5800 - Manual

W
AVEFORM MONIT
OR
LV5800 MULTI SDI MONITOR
Powerful, Complete and Versatile
The LV5800 is a powerful multi SDI monitor that allows you freely to configure various input and output units according to
your applications. With different optional boards, this monitor gives you the versatility that you are looking for. No need
to purchase a product with functions that you might not use. Just get what you need to perform a great and accurate
measurement.
Simultaneous monitoring up to four inputs is possible. It provides waveform, vector, 5-Bar, picture, audio, data and status
displays in various combinations. Audio option supports loudness, lip-sync, and A/V delay measurements in addition to
providing Lissajous and Bar Graph displays. Headphone output mini jack is available on the front panel to monitor sound
(when digital audio board is installed).
MAIN FEATURES:
Monitor accepts up to 4 input slots and up to 2 output
slots. Each board operates independently.
Simultaneous monitoring of all available inputs (up to 4)
Provides Waveform, Vector, 5-Bar, Picture, Audio, Data
and Status displays in various combinations.
Built-in 6.3” XGA TFT display (1024 x 768) for a clear
and superb representation on the screen.
A 4-screen display allows arbitrary combination of
signals of different input units to be displayed.
The unit includes the “Capture” function, which allows to
store one frame of serial digital data in SD or HD format
to the internal or external USB memory (as DPX or TIF
file).
Remote control of the unit through TELNET, FTP using
the Ethernet connector on the rear panel.
Remote connector allows recalling of presets, detection
of errors and switching of inputs.
Includes a low-noise cooling system, which is controlled
by a temperature sensor.