Magnum Venus Plastech UltraMAX Installation - Manual

Installation
Quick List Instructions
1. Unpack unit & components
2. Place unit & stand pipe in
base plate or portable cart
(or mount to wall with wall
brackets) Tighten bolts to
secure
3. Install catalyst jug
4. Install resin surge chamber
& filter assembly
5. Install manifold air hose to
power cylinder
6. Attach hose fittings to resin
pump, catalyst pump,
manifold, air & flush tank
7. Install boom to mast (if
applicable)
8. Hang hose on boom (if
applicable)
9. Attach pickup hose
10. Place flush tank in holder
and attach air hose from
manifold
11. Double check all hose
fittings
12. See start-up sheet and
manual for further
instructions
UltraMAX™
Pumping System
Part No. M1100-1-2