Luminex 100 User Manual Version 1.7 - Manual (Page 61)

x MAP Technology Data Acquisition
PN 89-00002-00-063 Rev. A 6 - 11
Open. Opens an existing session
Close Session. Closes the current session. Prompts you to save
the session before closing.
Save. Saves the current session.
Save As. Saves the current session under a new name.
Print. Opens the print dialog box. You have the option of printing a
results table, calibration log, bar graph, histogram, and dot plot.
Print Setup. Opens the Print Setup dialog box. Use the settings in
this dialog box to choose printer options.
Exit. Exits the Luminex software. Prompts you to save the current
session before exiting.
Edit Project Settings. Opens the Settings dialog box.
Clear Project. Clears the table, graphs, and collected data files in
the open project.
Create Template. Opens the Create Template dialog box.
Reset to Calibrated Settings - . Resets the session to the
previously calibrated settings.
Analyzer The Analyzer commands are discussed in detail in Chapter 5.
Sample Load Data. Loads data to a session.
Start/Cancel. Starts or cancels a session.
Delete Data. Deletes the data in the Multiplex Acquisition window.
Copy. Copies the current information to another file.
Tools Options. Opens the Options dialog box.
Manage Templates. Opens the Choose Template to Delete dialog
box.
View Toolbar. Toggles the toolbar on or off.
System Monitor. Toggles the System Monitor on and off.
Expand/Contract. This command is available when the Multiplex
Acquisition window is open. It toggles the bead gates views on and
off.
Next Window/Previous Window. These commands show the
window related to sequential windows related to sample acquisition.