Safety precautions, Electrical – Luminex 200 User Manual with LDS 1.7 Software User Manual

Page 21

Advertising
background image

x

MAP Technology

Safety

PN 89-00002-00-150 Rev. A

2 - 3

Danger: This message is used in cases where significant risk of
serious injury or death is present.

Safety Precautions

Please read the following safety information before setting up or
using the Luminex 200 system. A user should always be present
during system operation. This system contains electrical, mechanical,
and laser components which, if handled improperly, are potentially
harmful. In addition, biological hazards may be present during
Luminex analyzer operation. Therefore, Luminex Corporation
recommends that all Luminex analyzer users become familiar with
the specific safety advisories below, in addition to adhering to
standard laboratory safety practices. The protection provided by the
equipment may be impaired or the warranty voided if the equipment
is used in a manner not specified by Luminex Corporation.

Electrical

The Luminex analyzer and Luminex XYP must be connected to
approved power sources.

Do not perform any maintenance or cleaning of the system’s
electrical components (except for the fuses).

This caution label appears on the back of Luminex analyzers and on
the Luminex XYP:

Figure 2-1. Fuse Replacement Warning Label

This label appears on the back of the Luminex analyzer and the
Luminex XYP.

Advertising