Luminex 200 User Manual with LDS 1.7 Software - Manual (Page 24)

Luminex 200 User Manual for LDS Version 1.7
x
MAP Technology
2 - 6 PN 89-00002-00-150 Rev. A
Figure 2-6. Laser Caution Label
Do not remove the analyzer cover. When performing routine
maintenance, ensure that power to the analyzer is OFF and the power
cord is disconnected.
All laser apertures in the analyzer are contained within a protective
housing. This label appears on the optics cover within the Luminex
analyzer.
Figure 2-7. Laser Caution Label on Optics Cover
This label appears above the laser apertures located inside the optics
enclosure inside the Luminex analyzer.