Luminex 200 User Manual with LDS 1.7 Software - Manual (Page 44)

Luminex 200 User Manual for LDS Version 1.7
x
MAP Technology
4 - 6 PN 89-00002-00-150 Rev. A
Installing Software
and Firmware
The Luminex 200 system arrives preloaded with the Data Collector
software. It is possible that you may need to reload the software at
some time.
To reinstall the software:
1. Backup log files. Copy your template directory and the file
named calibrationlog.mdb to a backup location. These files may
be found in the Luminex setup directory.
2. Uninstall the Luminex Data Collector software using the
Windows Add/Remove programs function. On the lower left
corner of your screen, click Start > Settings > Control Panel.
The Control Panel window opens. Click Add/Remove
Programs. The Add/Remove Programs window opens. Click
Luminex Data Collector, then click Change/Remove. Follow
the prompts throughout the rest of the removal process.
3. Insert the Luminex CD into the CD ROM drive. The program
manager begins installing the software, displaying instructions
when necessary.
4. Restart your computer after installing the Luminex software.
5. Copy your template file directory and the calibrationlog.mdb file
from the backup location to the Luminex setup directory.
6. Verify that the firmware version, listed in the Help menu, is the
most recent version. Contact Technical Support to check this
information.
What to Do Next
After you assemble and power the system, verify that your analyzer
is correctly installed and functions properly using the “Verification”
section beginning on page 8-14 in the “Troubleshooting” chapter.
You can find answers to frequently asked questions (FAQs) on our
website: http://www.luminexcorp.com. From the Support menu at the
top of the page, select FAQs.
For assistance, contact Luminex Technical Support via email. Users
may reach us at [email protected] or
[email protected].
Users in the U.S. and Canada can call us at 1-877-785-BEAD (1-
877-785-2323) between the hours of 7:00 a.m. and 7:00 p.m. Central