Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 119)

• System Temperature
• DD Temperature
• CL1 Temperature
• CL2 Temperature
• CL3 Temperature
• CL1 Voltage
• CL2 Voltage
• CL3 Voltage
• DD Voltage
• RP1 Voltage
• Number of Syringes
Items in this list relating to calibration and verification (CAL/VER) have one of the following
states:
• Passed - Indicates that the process completed successfully.
• Failed - Indicates that the process was not completed successfully. Failed items appear in
red.
• Not Current - Indicates that verifiers are not current. Verifiers are not current if you have
not calibrated the system since the last time you ran the verifiers.
• Not Yet Run - Indicates that this process has not yet been run on the machine.
Copy - Copies the system information to the Windows clipboard. You can then paste it into a
text editor such as Notepad.
Save - Opens the Save As dialog box to specify a file name and location to save the system
information file.
System Status Tab
Maintenance > System Status
Use this tab to view, print, and save system status log information. You can also access this
information by clicking the System Status button on the System Monitor.
This tab contains the following:
• Search By Log Type - Filters the type of log information. Select All, Maintenance,
Security, or Warnings and Errors.
• Search By Log Date - Enables using a date range to display a log of system activities.
• Advanced - Displays the following added information in the system log:
• Log Type
• User ID
• Error Level
• Log - Displays a list of information about each system process. The following information
appears in the list:
Maintenance Page
105