Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 44)

NOTE: If the batch spans more than one plate, the tray ejects automatically
when all defined wells have been acquired. A dialog box opens,
prompting you to insert the next plate.
Protocol Subtab
Batches > Batches > Protocol
Use this tab to name a batch, type a batch description, select a protocol, and view active
reagents. This tab contains the following:
Batch Name/Description - Used to name and describe a batch.
Select a Protocol - Contains the protocol name, version, manufacturer, and creation date for
each protocol.
Active Reagents - Displays assay and control lots/kits associated with the selected protocol.
The Standard/Ctrls Kit Name - Lot# field displays the assay standard/control kit/ lot name and
lot number currently associated with the selected protocol. The Standard Lots and Controls
Lots fields display any standard or control lots associated with the selected protocol.
Cancel - Returns to the main Batches tab.
Next - If you have selected a protocol with no standards or controls (displayed as None in
the Active Reagents section), clicking Next continues to the Plate Layout tab. If you have
selected a protocol with standards and controls, clicking Next continues to the Stds & Ctrls
tab.
Standards and Controls (Stds & Ctrls) Subtab
Batches > Batches > Stds & Ctrls
xPONENT ® for FLEXMAP 3D ®
30