Luminex xPONENT 4.2 for FLEXMAP - Manual (Page 65)

Results Page
Once data is collected in a batch, observation and analysis take place in the Results page.
This page contains the following tabs:
Current Batch - View statistics for the current run and progress per well.
Saved Batches - View information about already processed batches and if necessary, replay
them or recalculate their data.
• From the Saved Batches tab, select the Open button located at the bottom right of the
screen. Four subtabs will open:
• Results - Shows the results of a new or saved batch.
• Settings - Shows the report type you selected.
• Log - Information about acquisition.
• Sample Details - Details about the sample.
• From the Saved Batches tab, select the Replay button located at the bottom right of the
screen. A dialog box will display Recalculate data and Replay batch. Select either
Replay batch or Recalculate data. Three subtabs will open:
• Protocols
• Stds & Ctrls
• Plate Layout
LIS Results- View a batch or transmit a batch that contains LIS results.
Reports - This enables you to select a report to view.
From the Report drop-down box you can choose the Type of report to view.
• Batches Reports
• Data Interpretation
• Batch Settings
• Plate Layout
Chapter 5: Results Page
51