Luminex 2.3 software, Main window – Luminex IS Version 2.3 User Manual

Page 11

Advertising
background image

PN 89-00002-00-110 Rev. B

1

Luminex 2.3 Software

This manual describes how to use the Luminex IS 2.3 software. It
includes a glossary and information regarding the CSV file setup.
The software user should have a basic familiarity with computers and
Microsoft® Windows®. Commands are often available through
more than one method, such as from the main menu bar, the toolbar,
or on different windows. However, each procedure in this manual
will describe only one method of accessing commands.

This chapter has the following sections:

Main Window - This section describes the main window of the
Luminex IS 2.3 software, including tabs and commands. Use this
section to become familiar with the main functions of the
software.

Secondary Windows - This section describes the secondary
windows in the Luminex IS 2.3 software, including the Analysis
Window and Batch Setup Window.

Commands - This section describes the functions of the
commands in the Luminex IS 2.3 software.

Procedures - This section describes how to perform tasks using
the Luminex IS 2.3 software.

When using microtiter plates, use plates with wells that will hold at
least 185 µL (the extra 25 µL from the sample, plus an extra 160 µL
that is dispensed back into the well following acquisition).

Main Window

The Luminex IS 2.3 software starts automatically when you log into
Windows.

When the first software User window opens, the Main window is
open, with the Home tab displayed, as shown in Figure 1

®

Advertising