Luminex IS Version 2.3 - Manual (Page 26)

Luminex IS Software Manual for Version 2.3
x
MAP Technology
16 PN 89-00002-00-110 Rev. B
accumulation of events. Increasing density is indicated by
contrasting colors. See Table 2 for the density dot plot color legend.
The density dot plot allows visual elimination of data values
determined to be insignificant to the display. Luminex recommends
you collect your data in density dot plot mode to observe all
collected events. Post acquisition does not display decaying dot plot;
it’s only a real-time function.
Status Bar
The Status Bar displays information about the Command State,
Device Status, Device Activity, Laser Status, Total Events per
Second, and Region Events per Second. Color coding indicates the
urgency of each item’s status. Device Activity uses no color coding.
Figure 15 System Status Bar
Table 3 describes the types of status bar messages in relation to the
message color coding.
Table 2. Dot Plot Color Legend
Layer Color
0
1
2
3
4
5
6
7
8 none
dark blue
pink
dark green
cyan
light blue
light green
orange
dark red
Table 3. Status Bar Color Coding
Category Color Indicates
Command
State Indicates communication status of the Luminex analyzer or
operations being processed
Green Idle or processing
Yellow Connecting, pausing, or paused
Red Disconnected or locked out