Luminex IS Version 2.3 - Manual (Page 62)

Luminex IS Software Manual for Version 2.3
x
MAP Technology
52 PN 89-00002-00-110 Rev. B
2. Double-click on the desired batch. The system loads the batch as
you created it in the Run Batch tab.
3. Click Start Plate to initiate batch acquisition.
Copying and
Exporting Batch
Data
‹
To export Batch Data:
Right-click in the Batch Data area of the Acquisition Detail tab.
In the right-click menu, click Copy to copy the currently
displayed data to the clipboard. Click Export to manually export
the currently loaded batch to the appropriate Output.csv file.
Clear a Batch from
the System
The Clear Batch command clears the entire batch from the Run
Batch tab or the Message Log on the Diagnostic tab. Once you
choose to clear the batch and verify that you want to continue with
the command, you can recover the cleared batch if it has not been run
by clicking Open Batch.
‹
To clear a batch from the system:
1. Right-click on the area to clear.
2. Click Clear in the dialog box.
3. Click Yes to confirm that you want to clear the batch.
Replay a Batch You can reprocess batches through the system multiple times using
Replay Batch. Replay Batch uses the data stored in the run files from
the initial acquisition to reprocess a batch, creating a new batch
output file.
Each time you reprocess a batch using Replay Batch, the system
handles it as if it is a new batch; thus, creating a separate processed
batch entry and output file. The initial batch data and output file
always remain intact and unchanged.
You reprocess a batch using Replay Batch to:
• Run as demonstrations to see how the system processes samples
and analyzes the results.
• Test a batch using different parameters, such as setting a
different number of events to be collected or using a different
bead map or new formula for analysis, also using a different
template.The number of beads for collection must be less than or
equal to the number of previously collected in the original
sample.
If you reprocess a batch with the same template parameters in a
different template, the system obtains results identical to the original